The 307 Series regulators are intended for secondary pressure control of non-corrosive, high purity or liquefied gases or as point of use pressure control in high purity gas distribution systems.
The 307 Series regulators are intended for secondary pressure control of non-corrosive, high purity or liquefied gases or as point of use pressure control in high purity gas distribution systems.
Each letter/number in the catalog number indicates the selected valve configuration.
A – Outlet pressure/outlet gauges range B – 0 C – Outlet fittings, needle or diaphragm valves.. D – Gauge – different units CON – Inlet connections OP – Optional Accessories
Please consult with us the correct valve selection.
Regulators brochures can be found at this link https://www.chromservis.eu/…as-detection
| Brand: | 307 Series regulator |
| Category: | Measurement and control / Gas measurement / Pressure regulators |
| Connector type | Description | Generic gas property | Example gases or mixtures components |
|---|---|---|---|
| 1 | W 21.8 × 1/14" LH | Flammable | Hydrogen, Propane |
| 2 | W 21.8" x 1/14" LH | Flammable | Propane |
| 3 | Yoke | Flammable | Acetylene |
| 3.1 | M 24 × 2" LH | Flammable | Acetylene |
| 5 | W 1" x 1/8" LH | Toxic | Carbon Monoxide |
| 6 | W 21.8 × 1/14" | Various | Argon, Helium, Carbon Dioxide |
| 7 | G 5/8" | Toxic | Sulphur Dioxide |
| 8 | W 1" x 1/8" | Toxic | Boron Trichloride |
| 9 | G 3/4" | Oxidiser | Oxygen |
| 10 | W 24.32 × 1/14" R | Inerts | Nitrogen |
| 11 | G 3/8" | Oxidiser | Nitrous Oxide (>3 l size) |
| 12 | G 3/4" INT | Oxidiser | Nitrous Oxide (<3 l size) |
| 13 | G 5/8" INT | Non Flammable | Air |
| 14 | M 19 × 1.5 LH | Various | Mixtures |