
TLC – ready-to-use layers Comprehensive range of plate sizes, surface chemistries and packings Pre-coated plates ready for immediate use Homogeneous, smooth and well adhering layers Available with UV indicator or non-impregnated Consistent high quality from batch-to-batch and from pl
Standard analytical TLC plates typically have adsorbent layers that are nominally between 0.20–0.25 mm in thickness. Particle size is about 5–17 µm. Preparative TLC is used for purification and isolation of analytes from impurities. Preparative TLC layers (≥ 0.5 mm) are only on glass plates available. For 2 mm preparative layers a slightly coarser material is used.
Brand | ALUGRAM Xtra |
Phase | Xtra SIL G UV254 |
Base-support material | Aluminum sheets |
Layer | unmodified silica gel (SiOH) |
Mode | Normal phase (NP) |
Plate size | 20×20 cm |
Layer thickness | 0.20 mm |
Layer hardness | Standard, soft |
UV indicator | Yes |
Particle size | 5 to 17 µm |
Particle type | Fully porous particles (FPP) |
Particle shape | Irregular |
Pore size | 60 Å |
Pore volume | 0.75 mL/g |
Binder | Yes |
pH stability | 2.0 to 8.0 |
Aflatoxins, Alkaloids, Amines, Amino acids, Analgesics, Antibiotics, Hormones, Marihuana compounds,Patulin, Steroids, Sweeteners, Vitamins