0
0
Your basket is empty...
CHS ODOSens W, fixed cable - process sensor for DO measurement
Reference: CHS-5646-W3FX
The CHS ODOSens W process sensor was developed for dissolved oxygen (DO) measurement in pure and process waters. The principle of measurement is based on the effect of dynamic luminescence quenching by molecular oxygen at suitable media.
Your price
on inquiry
Availability: ask us
Product description
Product description
The CHS ODOSens W process sensor was developed for dissolved oxygen (DO) measurement in pure and process waters. The principle of measurement is based on the effect of dynamic luminescence quenching by molecular oxygen at suitable media.
Fetures and benefits
- easy and reliable dissolved oxygen measurement
- interchangeable cap with luminofor – no need for other maintenance
- no mechaqnical moving parts
- immediate installation
- pressure and salinity compensation
Applications
- Wastewater treatment plants
- Primary and recirculation industrial water
Parameters
Parameters
| Brand: | CHS ODOSens |
| Category: | Measurement and control / Measurement of liquids / Sensors |
Technical parameters
| Measuring range: | 0 to 20,00 mg/l (0–200%) |
| Accuracy: | ±0,1 mg/l or ±1% |
| Response time: | T90 <60s |
| Luminofor diameter: | 10 mm |
| Operation temperature: | –10 to 60°C |
| Operating pressure: | max 5 bar |
| Protection | IP 68 (connector IP 67) |
| Material: | AISI 316, special glass optiocs, NBR and silicone o-rings |
| Output signal: | RS-485 Modbus RTU Protocol |
| Cable: | fixed, 10 m length |
| Power supply: | 12 to 24 VDC |
| Sensor diameter: | 33,4 mm |
| Sensor length: | 196,8 mm (excl. connector) |
Use
| Phys. property | DO |
| Maintenance | Maintenance free |
| ATEX | General use |
